renode

Renode - Antmicro's open source simulation and virtual development framework for complex embedded systems

Open-source reverse engineering and firmware development for the FNIRSI 2C53T oscilloscope/multimeter/signal generator

Agent-native embedded systems lab for pluggable simulation, evidence-driven validation, and controlled evolution.

Repository with RP2040 simulation models.

Reverse engineering the Motorola sensorhub firmware

A plugin for Ghidra for automatic analysis of the binding of individual registers and their layouts.

Run your tests in a configurable, emulated Linux environment with a custom kernel and access to virtual peripherals

A custom Cargo runner that runs Rust firmware in the renode emulator

Rust bootloader, firmware and CLI tools for the AirGradient PRO

Embassy firmware emulated with Renode

Compile C code for an ARM Cortex-M micro-controller and run it in Renode

Firmware development for a low-cost Vaccine Refrigerator (VARE) using the STM32F407G-DISC1 Microcontroller programmed in C with PlatformIO IDE using the STM32 HAL Library and simulated with Renode™.

Use this repository to create a reproduction case for your Renode issue

FPGA support for anode using CFU Playground

Firmware Project for counting people using STM32F4x microcontroller

Renode GitHub action for testing software in the Renode environment

A simple Renode example with Robot Framework tests for an STM32 board.

Low-power embedded disaster relief GPS router for OSM map data